Before a mold runs production, it has to prove it can consistently produce acceptable parts under defined conditions.
Qualification establishes that proof. It connects the machine, mold, material, and process into a single validated system that can be repeated on demand.
Validation follows a structured sequence.
Installation Qualification (IQ) confirms everything is set up correctly.
Operational Qualification (OQ) defines how the process behaves.
Performance Qualification (PQ) proves that the process holds over time.
Each phase builds on the previous one, moving from setup to stability.
IQ verifies that all equipment is installed and functioning as intended.
This includes confirming mold identification, machine compatibility, cooling system performance, and proper calibration of sensors and controls. Utilities like water, air, and electrical systems are also checked.
The result is a verified starting point where the system matches design intent.
OQ defines the process window using structured experimentation.
DOE is used to study how variables like injection speed, temperature, and pressure affect outputs such as part dimensions and weight. From this, the Dimensional Process Window is established.
This phase identifies where the process runs consistently and where it becomes unstable. That range becomes the foundation for production settings.
PQ confirms the process performs consistently under normal production conditions.
A series of consecutive parts is produced at the defined settings, and critical dimensions are measured. Capability metrics like Cp and Cpk are calculated to confirm the process meets requirements.
This demonstrates that the process is not only capable, but repeatable over time.
Once PQ is complete, the process is locked.
Any change to parameters, material, or tooling must go through controlled review and, if necessary, revalidation. This prevents drift and keeps production aligned with the validated state.
The complete qualification process connects multiple elements.
Design review ensures the tool is capable before testing begins. IQ confirms setup. OQ defines the process window. PQ verifies long-term performance. Final documentation compiles all results into a traceable record.
This creates a continuous link from design through production.
Qualification data feeds directly into quality systems.
Process parameters, capability results, and validation records are stored and tracked. This supports regulatory requirements and provides a clear audit trail for how the process was developed and controlled.
Qualification is treated as the foundation of every molding process.
Each phase is documented, reviewed, and tied to measurable data. Engineering, quality, and production all contribute to defining and verifying the process.
That structure ensures every mold enters production with a proven, repeatable process that performs consistently over time.