Polysulfone (PSU) is a high-performance, semi-transparent thermoplastic known for its exceptional thermal stability, mechanical strength, and resistance to hydrolysis, making it a preferred choice for components subjected to demanding conditions. This amorphous polymer maintains its critical properties across a wide temperature range and under exposure to various chemicals and sterilization methods, rendering it highly suitable for specialized fields such as medical devices, aerospace, and filtration. It’s often used by plastic injection molding companies and design and manufacturing services providers who need precision and long-term reliability in harsh conditions.
Read More About Streamlining Prototyping: The Benefits of Quick Turn Tooling
PSU exhibits a high heat deflection temperature, typically around 345°F (174°C), allowing it to retain its structural integrity and mechanical properties at elevated temperatures where many other thermoplastics would fail. This makes it suitable for uses requiring steam sterilization and for components operating in hot environments. Its continuous service temperature can reach up to approximately 285-320°F (140-160°C), depending on the specific grade and load conditions.
One of the hallmark features of PSU is its outstanding resistance to hydrolysis, even when subjected to repeated steam autoclaving cycles. This characteristic is crucial for medical instruments and devices that require frequent sterilization. It also performs well in applications involving continuous exposure to hot water and steam, outperforming materials like polycarbonate in such conditions.
PSU offers good resistance to a variety of chemicals, including aqueous solutions of mineral acids, alkalis, and salts across a wide pH range (typically pH 2 to 13). It is also resistant to many detergents, hydrocarbon oils, and oxidizing agents, allowing it to be cleaned with bleaches. This broad chemical compatibility makes it a reliable material for fluid-handling components in custom injection molding solutions for food processing and medical applications.
This material possesses high mechanical strength, rigidity, and toughness. It maintains good dimensional stability under mechanical stress and over a broad temperature range. PSU also demonstrates low creep, meaning it resists deformation under sustained load, particularly at elevated temperatures, which is vital for load-bearing components.
Natural PSU is inherently transparent, often with an amber tint. While machining can affect its surface clarity, secondary polishing processes can restore its optical transparency if needed for specific uses like sight glasses or transparent medical housings.
Certain grades of PSU are biocompatible and meet ISO 13485 injection molding and FDA injection molding requirements for food contact and USP Class VI standards for medical devices. This compliance, coupled with its sterilizability, makes PSU a trusted material in the medical injection molding sector for devices that come into contact with biological tissues or fluids.
PSU exhibits good electrical insulating properties that remain stable over a wide range of temperatures and after exposure to humidity or water immersion. This makes it suitable for electrical connectors and components requiring reliable insulation.
Get in touch with Aprios for expert plastic injection molding services, precise tooling, and FDA-compliant solutions tailored to your project.
The robust combination of thermal, chemical, and mechanical properties makes PSU a versatile material for a variety of demanding industries.
PSU is extensively used in the medical field for components that require repeated sterilization, such as surgical instrument handles and trays, sterilization cases, and parts of dialysis equipment. Its biocompatibility and resistance to steam, ethylene oxide, gamma, and plasma sterilization methods are critical. Components for medical injection molding, like manifolds and fluid connectors, benefit from PSU's hydrolytic stability and chemical inertness.
Due to its controlled porosity and excellent chemical and thermal stability, PSU is a key material in the fabrication of membranes for ultrafiltration, microfiltration, and reverse osmosis. These membranes are utilized in water treatment, bioprocessing, food and beverage processing, and industrial gas separation. Renal dialysis membranes are a significant medical utilization of PSU.
In the aerospace and automotive sectors, PSU is employed for interior aircraft components, electrical connectors, and under-the-hood parts that require high heat resistance and good mechanical strength. Its ability to withstand harsh chemical environments and temperature fluctuations is advantageous.
FDA-compliant grades of PSU are used for food processing equipment, such as piping, valves, and filtration components, that are exposed to hot liquids, steam, and aggressive cleaning agents. Its transparency can also be beneficial for monitoring flow in food and beverage lines.
Thanks to its stable dielectric properties and high-temperature resistance, PSU finds use in electrical insulators, connectors, and housings for electronic devices where performance at elevated temperatures is necessary.
PSU has successfully replaced traditional materials like brass in pressurized hot water systems due to its long-term hydrolytic stability and resistance to chlorinated water. It is used for fittings, valves, and other components in demanding plumbing scenarios.
Read More About Injection Molding Defects: Voids – Causes & Fixes | Aprios
While PSU inherently offers a strong profile, its properties can be further tailored through various additives and modifications to meet specific performance targets for specialized processes like injection molding.
Adding glass fibers significantly enhances the rigidity, tensile strength, and dimensional stability of PSU. Glass-reinforced grades offer improved mechanical performance at elevated temperatures and are often used for structural components that require greater stiffness and load-bearing capacity.
Carbon fibers can be incorporated to increase strength and stiffness even further than glass fibers, while also improving thermal and electrical conductivity. This makes carbon-filled PSU suitable for applications requiring electrostatic dissipation or higher thermal performance.
Although naturally amber and transparent, PSU can be compounded with various colorants to meet aesthetic requirements or for functional color-coding in medical devices or industrial components. Care must be taken to select colorants that can withstand PSU's high processing temperatures.
Internal lubricants can be added to PSU formulations to improve melt flow characteristics during injection molding. This can aid in filling complex mold geometries and can also reduce wear on processing equipment.
PSU can be blended with other polymers, such as polyamides (PA) or polycarbonate (PC), to achieve specific property balances. For instance, blending with PA can enhance flow and toughness, while blending with PC might aim to modify processability, though chemical resistance improvements are not typically seen with PC blends.
For applications requiring enhanced bonding for printing, coatings, or adhesives, the surface of PSU parts can be treated using methods like plasma treatment to increase surface energy.
Read More About Unlock Benefits of New Carbon DLS Pricing Model | Aprios
Despite its many advantages, PSU has certain limitations that designers and engineers should consider.
PSU is susceptible to attack and stress cracking when exposed to certain polar organic solvents, such as ketones (e.g., acetone), esters, chlorinated hydrocarbons (e.g., methylene chloride), and aromatic hydrocarbons (e.g., toluene, benzene). This limits its use in environments where such chemicals are present.
Like many amorphous thermoplastics, PSU can exhibit notch sensitivity, meaning that sharp corners or notches in a part design can act as stress concentrators, potentially leading to premature failure under impact or load. Careful design practices, such as incorporating generous radii, are important.
Prolonged exposure to ultraviolet (UV) radiation can lead to degradation of PSU, causing discoloration and a reduction in mechanical properties. Therefore, it is generally not recommended for long-term outdoor use unless it is UV-stabilized or protected.
Compared to commodity plastics and some engineering thermoplastics like polycarbonate or ABS, PSU is relatively expensive. Its use is typically justified in applications where its superior performance characteristics are essential and other materials would not suffice.
PSU requires high processing temperatures (both melt and mold temperatures) during injection molding tooling due to its high viscosity. This necessitates processing equipment capable of reaching these temperatures and careful control over the molding process to minimize residual stresses, which can exacerbate susceptibility to stress cracking. Pre-drying of the resin is also critical, as PSU is hygroscopic and absorbed moisture can cause degradation during processing.
Explore our design for manufacturing solutions and access full-scale support—from medical device prototypes to end-to-end manufacturing services.
Choosing Polysulfone is often driven by its exceptional performance in harsh conditions where other polymers fall short. Its high thermal stability allows it to function reliably at temperatures that would degrade many plastics, making it ideal for applications involving heat, such as steam sterilization or high-temperature fluid handling. The outstanding hydrolytic stability ensures longevity and integrity in environments with continuous exposure to hot water or steam, a critical factor for medical devices and plumbing components.
Furthermore, PSU's chemical resistance against a wide array of acids, bases, and oils, coupled with its inherent strength and stiffness, provides durability in chemically aggressive settings. For medical device manufacturers, the availability of biocompatible and FDA-compliant grades, along with its proven sterilizability through various methods, makes PSU a trusted material for critical healthcare products. While it comes at a higher price point, the long-term reliability, ability to withstand repeated sterilization cycles, and consistent performance in demanding uses often justify the investment, especially in high-stakes industries like medical and aerospace. Its processability via injection molding allows for the creation of complex, high-precision parts, making it an excellent fit for plastic injection mold design services.
Read More About Why Invest in Carbon DLS Additive Manufacturing | Aprios
At Aprios, we can help you select the right PSU material for your specific needs. Get in touch for expert advice and solutions tailored to your project!
You can also view our Material Selection tool.