4 min read
Top Plastics for High-Quality Injection Molding
Choosing the right plastic is one of the most critical decisions in any injection molding project. This choice dictates a part's mechanical strength,...
Design for Manufacturing
4 min read
3D Printing vs Injection Molding: Key Differences
3D printing and injection molding are two of the most common manufacturing processes used to produce plastic parts. While each method has distinct...
8 min read
Understanding Lead Times in Injection Molding for Production Planning
Lead times are a significant consideration in any manufacturing endeavor, and a thorough understanding of the timelines associated with different...
8 min read
DFM in Injection Molding: Cut Costs, Improve Quality
Designing for manufacturability (DFM) is a foundational practice in the realm of injection molding. It encompasses a series of design choices aimed...
5 min read
Choosing the Best Surface Finish for Injection Molded Parts
When developing a plastic part through injection molding, the surface finish might initially seem like a purely aesthetic choice. However, its...
3 min read
Injection Molding Defects: Discoloration – Why It Happens and How to Avoid It
What Is Discoloration? Discoloration in injection molding refers to any noticeable inconsistencies in the color of molded parts, such as streaks or...
2 min read
Guide to Optimal Material Choices for Injection Molding
Choosing the Right Material for Injection Molding: A Comprehensive Guide Material selection is a critical aspect of injection molding, influencing...
1 min read
Injection Molding Voids: Causes & Solutions
What Are Weld Lines? Weld lines are visible lines or seams that appear on molded plastic parts where two or more streams of molten plastic meet but...
2 min read
Injection Molding Defects: Voids – Causes & Fixes | Aprios
What Are Voids? Voids are empty pockets or spaces that form inside your molded parts. While they might not always be visible from the outside, they...
1 min read
Design for Minimal Post Processing | Save Time & Costs
R&D engineers and product designers are always balancing time, cost, and quality. Post-processing can be a drain on all three, so designing to...